Table of Contents
Advertisement
Effective Plotting Area
The device has an area which cannot perform printing, due to mechanical reasons.
This area is called " dead space".
15 mm
Medium
feeding
direction
Changing the effective printing area...
Initial value of dead space for right and left of medium is 15 m each.
The effective plotting area can be changed by changing the dead space.
Dead space is set with [Margin] in FUNCTION mode.
0 mm
Effective
printing
area
25 mm
Roll
medium
- 4.12 -
15 mm 15 mm
Cut sheet
110 mm
Effective
15 mm
printing
area
65 mm
medium
Advertisement
Table of Contents
