Table of Contents
Advertisement
Effective Plotting Area
The device has an area which cannot perform printing, due to mechanical reasons.
This area is called " dead space".
5 mm
Medium
feeding
direction
•
Changing the effective printing area...
Initial value of dead space for right and left of medium is 5 mm each.
The effective plotting area can be changed by changing the dead space.
Dead space is set with [Margin] in FUNCTION mode.
•
The maximum plot area is getting narrow in a high speed scan mode at
360x360, 360x540, and 360x720 dpi.
0 mm
Effective
printing
area
25 mm
Roll
medium
JV22-130 : 1361 mm -> 1321 mm
JV22-160 : 1610 mm -> 1570 mm
5 mm 5 mm
- 4.12 -
110 mm
Effective
5 mm
printing
area
65 mm
Cut sheet
medium
Advertisement
Table of Contents
