Configuration and Function
Front Side
Indicator
Indicating a state of the machine.
P.1-9)
(
Carriage (
P.1-6)
Table
Setting media on it. (
There are absorbing holes
on the table so that media
is absorbed when vacuum
is ON.
Suction valve
Switch at setting media.
(
P.2-5)
Rear Side
Waste ink tank
Waste ink which has been used
for cleaning operation and so on,
is stored. (
P.4-10)
Roll hanger
Set roll sheet here. (
P.2-5)
Y-bar
Moved on the table at drawing.
P.2-8)
Operation Panel
Operation keys for executing settings required for the
machine, and a display to display operation items are
placed.(
P.1-4)
Power button
This button is placed in the left side of the operation
panel to turn ON/OFF the power of this unit instead of
the power switch of main body.(
Main power switch
ON/OFF the power of the
machine.
USB2.0 connector
USB2.0 compliance interface.
(
Ink station
Insert ink cartridges here.
(
P.1-10)
P.2-4, P.2-15)
P.1-8)
1-3
1