Table of Contents
Advertisement
Configuration and function
The front
13
12
Name
1
Left maintenance cover
2
Front cover
3
Right maintenance cover
4
Operation panel
5
Power switch
6
UV lamp status indicator
7
UV unit
8
Waste ink tank
9
Water heater
10 Blower unit
11
Sub-panel
12 UV light-resistant panel
13 Table
1
2
11
10
Function
Position for standby during printing. Equipped with a flushing tray
and opened and closed during maintenance.
It is opened when setting media or taking a corrective measure
against a media jam. Even if the power switch is off, keep the
front cover closed to perform the ink clogging preventive opera-
tion.
Equipped with a capping station and opened and closed during
maintenance.
This panel has the operation keys required for operating the
device and the LCD for displaying set items, etc.
It turns on/off the power to the device.
Indicates the UV lamp status. (
Error (red)/UV lamp OFF, then cooling (orange)/enabled (green)
Supplies power for the UV lamp.
Waste ink gathers in this tank.
Keeps ink at appropriate temperature. (
This allows a media to be pneumatically picked on the praten.
Provides functions for moving the table up/down, turning the
blower ON/OFF and copying.
Blocks light leaked from the UV lamp.
Moves back and forth when performing printing.
3
9
8
- 1-4 -
4
5
6
7
P.1-13)
P.3-8)
Advertisement
Table of Contents
