Configuration And Function; Front/ Side - MIMAKI UJV-160 Operation Manual

Configuration and Function

Front/ Side

Y Bar
The guide to move the car-
riage.
Flushing Tray
Absorber in the Tray absorbs the
waste ink when the print head is
flushing.
Roll stopper / arm
The roll stopper to fix the roll media is
on the bottom of the back, and the roll
stopper arm to lock /unlock the roll
stopper is on the bottom of the front .
Platen
Outputs media along the platen.
Print Heater
Assists curing of ink during drawing.
(Located inside the platen)
1-4
Take-up Device
Takes up the roll media after
printing automatically.
Carriage
The head to print and the UV LED are in it. Scans
from side to side.
Y Bar Handle
Raises/lowers the Y Bar and adjusts the head
height to set thick media (up to 10mm).
Set only when adjusting the head height.
Waste Ink Tray
Waste ink gathers in this tank.
Operation Panel
The operation keys to set this
machine and the display are on it.
Clamp Lever (side)
Move the pinch rollers up/down to
hold/release the media.
Power Switch
Turns on/off the power of this
machine.
Ink Station
Each color of ink cartridge are in it.
Stand
Supports the main body. Casters to move are on it.