Table of Contents
Advertisement
Configuration and function
The Front
9
10
Name
1
Front cover
2
Carriage
3
Operation panel
4
Capping station
5
Clamp lever
6
Power switch
7
Waste ink tank
8
Stand
9
Platen
10
Maintenance cover
11
Take-up device
11
It is opened when setting medium or taking a corrective measure against
a medium jam. Even if the power switch is off, keep the front cover
closed to perform the ink clogging preventive operation.
Moves the print head from side to side.
This panel has the operation keys required for operating the device and
the LCD for displaying set items, etc.
Incorporates the ink cap to be capped on the head and the wiper, etc.
It is made to go up-down the pinch roller for holding medium.
It turns on/off the power to the device.
When the power switch is turned on, the POWER indicator lights in
green. While the main power switch is on, the ink clogging preventive
operation is performed periodically even if the power switch is off.
(Flashing)
Waste ink gathers in this tank.
It supports the main unit. It is provided with casters that are used to
move the device.
It puts out the medium as it is plotted on.
It is opened when performing maintenance.
It supports to wind up the roll medium printed.
Function
- 1.4 -
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
