Disassembly/Assembly Procedures; General Information - OKIDATA Pacemark 3410 Service Handbook

3.2

DISASSEMBLY/ASSEMBLY PROCEDURES

General Information

This section contains the printer disassembly procedures. Only the removal procedures are
explained here. Reverse the procedure for the installation.
At the bottom of each procedure is a listing of the parts covered in that procedure. The Okidata
part number, item description, comment (RSPL, Option, Consumable) and cross-reference to
Appendix B is provided for each part. Items included in the Recommended Spare Parts List are
indicated by the acronym RSPL. N/A will appear where a part number is not available.
Part Item
Number Description
This Service Handbook lists the disassembly procedures for major components of the unit.
Okidata DOES NOT recommend disassembling a unit which is operating normally. If you
decide to perform disassembly during this training, Okidata recommends that you perform only
the disassembly procedures for RSPL items. All other procedures are provided to assist you in
identifying parts. It is not likely that you will perform these procedures while servicing the unit.
Be sure to read all notes, cautions, and warnings, as they contain important information
regarding disassembly / assembly.
Pacemark 3410 Service Handbook
Comment
3 - 5
Appendix B
Reference
Maintenance