Power Supply Unit, Holder Inlet, Sheet Insulation - OKIDATA OKIPAGE 8c Service Manual

3.3.16 Power Supply Unit, Holder Inlet, Sheet Insulation

1. Remove the motor-fan (80-25). (See 3.3.2)
2. Remove the frame side (L), the cover assy side (R) and the cover rear (L). (See 3.3.8)
3. Detach the cable (1).
4. Remove the holder inlet (3) by unscrewing 2 screws (2), then remove the power switch (4) and
unplug the AC socket (5).
5. Draw the power supply unit (7) by unscrewing 2 screws (6), then unplug the cable (8).
Service Guide - OKIPAGE 8c
Chapter 3 Disassembly
Page: 43