Rear And Cut Sheet Paper Feed Sensor Levers - OKIDATA ML590 Service Manual

3.2.18 Rear and Cut Sheet Paper Feed Sensor Levers

1. Perform these procedures:
3.2.01
3.2.06
3.2.07
3.2.16
2. Turn the cut sheet/continuous feed paper sensor lever (1) until the flag is at the top, then work
the lever free.
3. Remove the lever.
4. Turn the rear feed paper sensor lever (2) until the flag is at the top, then work the lever free.
5. Remove the lever.
P/N 50804902 Lever: Sensor
Cut Sheet/Continuous
P/N 50804801 Lever: Rear Sensor
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
RSPL Both B.2.03
RSPL Both B.2.03
Page: 110