Christie D4K35 Service Manual page 125

Replace xxx with the channel number. Valid range is 101 - 164.
Cxxx
Select reference delay for the current channel
NONE
EXAMPLES:
(TDT+C101 1) Set output reference delay time to 1 on channel 101
(TDT+C101?) Get output reference delay time on channel 101
L/R Display Sequence (TFD)
Set L/R Display Sequence for 3D control. This selects which signal is considered first in the source signal, the left
or the right.
SUBCODE DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Cxxx
Select L/R display sequence for the current channel
NONE
EXAMPLES:
(TFD?L) List all entries on Input Frame Dominance control
(TFD+C101 1) Set Input Frame Dominance to 1 on channel 101
(TFD+C101?) Get Input Frame Dominance on channel 101
3D Frame Rate Multiple (TFR)
Setup frame rate multiple for 3D control
SUBCODE DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Cxxx
Select 3D frame rate for the current channel.
NONE
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 3) Set frame rate multiple to "4:2" on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
Get Certificates (TIG)
Gets the ICP certificate.
SUBCODE DESCRIPTION OF USE
Retrieve ICP Certificate
ICPC
EXAMPLES:
(TIG+ENGC?) Gets the LD certificate
(TIG+ICPC?) Gets the ICP certificate
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
Section 7: Serial API
7-25