Christie D4K35 Service Manual page 116

Christie d4k35 4k resolution for superior 3-chip dlp displays
Hide thumbs Also See for D4K35:
Table of Contents

Advertisement

Section 7: Serial API
Measured Color (MCG)
Select the Measured Color Gamut file. This file describes the native colorimetry for the projector as installed and is
required for accurate color processing in the electronics. This control is per channel to allow for different colorim-
etry for applications such as 3D.
SUBCODE
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Cxxx
Select measured color gamut for the current channel.
NONE
Set/Get active MCGD measurement values. The order is RedX, RedY, GreenX, GreenY, BlueX, BlueY,
DATA
WhiteX, WhiteY, BlackX, BlackY. The range for each value is 0 - 100000. The values represent MCGD
measurement values multiplied by 100000.
Saves the active MCGD measurement values to a new or existing MCGD file. (SET Only Command)
SAVE
EXAMPLES:
(MCG+C108 "Nominal") Use file "Nominal" on channel 108
(MCG+C108?) Get measured color file name on channel 108
(MCG?L) List all entries of measured color control
(MCG+DATA 123 31786 00333 0 100000 66000 1 88899 2154 5441) Set the active MCGD measurement values to
RedX=0.00123,
RedY=0.31786, GreenX=0.00333, GreenY=0.00000, BlueX=1.00000, BlueY= 0.66000, WhiteX=0.00001, WhiteY=0.88899,
BlackX=0.02154, BlackY=0.05441
(MCG+DATA?) Retrieve the 10 active MCGD measurement values.
(MCG+SAVE "filename") Save the 10 active MCGD measurement values to a file named "filename". If the file doesn't exist, it
will be created. If the file already exists, it will be overwritten.
Monitor Card Cage Fans (MCF)
Enables or disables the monitoring of the two additional card cage fans.
SUBCODE
DESCRIPTION OF USE
Set to 1 to monitor and 0 to not monitor.
NONE
EXAMPLES:
(MCF 1) Start monitoring the card cage fans
Channel Name (NAM)
Set the descriptive channel name for the specified channel
SUBCODE
DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Cxxx
Select channel name for the current channel.
NONE
EXAMPLES:
(NAM+C108 "Scope 2.39") Set channel name for channel 108
(NAM+C108?) Get channel name for channel 108
7-16
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)

Advertisement

Table of Contents
loading

Table of Contents