Table of Contents
Advertisement
Power Consumption
Current Rating of 3Phase AC Input
Lamp Power Supply Output to Projection Head
Operating Voltage Range
Start-up Voltage (Open Current)
Operating Current Range
Ripple
Connector Type
Lamp Power Supply Power Receptacle Output
Operating Voltage Range
Operating Current Range - Projection Head
Operating Current Range - Heat Extractor
Current Rating of Input
8.6.3 UPS AC Input
Voltage Range
Line Frequency
Inrush Current
Current Consumption
Power Consumption
Current Rating of AC Input
8.7
Lamp
Type:
Power (software adjustable):
CDXL-201000W min., 2000W nom., 2200W max.
CDXL-301800W min., 3000W nom., 3300W max.
CDXL-452700W min., 4500W nom., 4950W max.
CDXL-603600W min., 6000W nom., 6600W max.
NOTES: 1) The lamp power supply is current regulated to a maximum of 180 A.. Therefore the maximum
power specification for a given lamp may not be achievable until the lamp has aged, since lamp voltage
increases with hours of use.
2) The maximum power of the lamp power supply is restricted to 7000W ± 100W.
Average Life:
CDXL-203500 hours
CDXL-302500 hours
CDXL-45900 hours
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
8.8 kW max. (at max. output for 6kW lamp plus head)
37A
18-46 VDC
125-155 VDC
50-180 A
1% max (at 25°C, rated input and rated output)
Field Wireable Lugs
200-230 VAC
6 A
1 A
Both run from 15 A breaker (internal)
100 - 240 VAC
50 Hz - 60 Hz nominal
70 A maximum
12 A maximum at 100 VAC
1200 W maximum
15 A maximum (Specified Wall Breaker)
Xenon bubble
Section 8: Specifications
8-7
Advertisement
Table of Contents
