Removing Projector Covers - Christie CP2230 Service Manual

Section 5: Parts and Module Replacement
5.5

Removing Projector Covers

5.5.1 Front Top Lid
Remove the top lid to gain access to the liquid
cooling system, the IOS for integrator adjustments
and the high security lid.
(Estimated Replacement Time: 2 minutes)
1. Unlock front top lid using the low security key
provided. (Figure 5-1)
2. Lift the lid up and remove.
5.5.2 High Security Lid
Remove the high security lid to access components in the
light engine and cardcage compartments. NOTICE: Only
Christie authorized service technicians should open the high
security lid.
(Estimated Replacement Time: 2 minutes)
1. Remove front top lid. Refer to
page 5-6.
2. Using the high security key, unlock the high security lid.
(Figure 5-2)
3. Lift the lid up and remove.
5-6
Never operate the projector or the fans without all the covers installed.
5.5.1 Front Top Lid, on
Figure 5-1 Front Top Lid
Figure 5-2 High Security Lid
CP2230 Service Manual
020-100562-06 Rev. 1 (05-2016)