Port; Lamp Power Supply (Lps); Control Port; Interlock Port - Christie D4K35 Service Manual

Christie d4k35 4k resolution for superior 3-chip dlp displays
Hide thumbs Also See for D4K35:
Table of Contents

Advertisement

8.3.6 3D Port
Interface
Connector
Bit Rate
Flow Control
Data Format
Communication Protocol

8.3.7 Lamp Power Supply (LPS)

Control Port

Interface
Connector at Lamp Power Supply End

Interlock Port

Interface
Connector at Lamp Power Supply End
Number and Type of Signals
8.3.8 MALM
(located on Auxiliary Input Panel)
Interface
Connector
Number of I/O Lines
8.4

Touch Panel Controller (660E)

Type of Display
Display Size
Display Resolution (H x V pixels)
Maximum Dimensions (W x H x D)
Integrated Operating System
Communication Interface with Projector
Power Requirement
Interface Connector
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
Proprietary 3D connector
15-pin subminiature D, female
1,200 bps
Software
1 start bit, 8 data bits, 1 stop bit, no parity
RS232 and GPIO
RS232
9-pin subminiature D, male
+5V TTL-compatible, opto-isolated at LPS end
9-pin subminiature D, female
1 - lamp enable (low = enable lamp)
3 - safety interlock (high = disable lamp)
1 - +5V to power opto-isolation interface
3.3V CMOS
9-pin subminiature D, female
4 GPIO
Color VGA TFT LCD, backlit
144.8 mm (5.7 inches) diagonal
640 x 480
195 mm x 148 mm x 44.4 mm
Microsoft Windows® XPe
10/100BaseT Ethernet
1.02 A maximum at 24VDC ± 10%
12-pin Circular connector (push-pull)
Section 8: Specifications
8-5

Advertisement

Table of Contents
loading

Table of Contents