Lamp Power Supply (Lps); Line Filter - Christie D4K35 Service Manual

Section 5: Parts and Module Replacement

5.15 Lamp Power Supply (LPS)

5.15.1 Line Filter

The line filter is the only accessible assembly that can be serviced by a Christie authorized service technician.
If the LPS itself is not functioning correctly the entire unit would be replaced.
(Estimated Replacement Time: 16 minutes)
1. Using a #2 Phillips
2. Slide the skin to the left in order to remove it.
3. Using a #2 Phillips
4. Remove the 10 harnesses.
5. Using a #2 Phillips
6. Remove the line filter.
5-44
, loosen the six screws from the front skin on the LPS. (Figure 5-68)
™
Figure 5-68 Remove LPS Front Skin
, remove the six screws securing the 10 harnesses on the line filter. (Figure 5-69)
™
, remove the four screws securing the line filter to the LPS. (Figure 5-69)
™
Figure 5-69 Remove Line Filter
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)