Table of Contents
Advertisement
Section 3: Service Setups
3.7
Hardware Change
The projector serial number is stored on four hardware devices, this includes the TPC, PIB3G, EVB and
Backplane. If ever more than two of these hardware devices are swapped the Hardware Change window
(Figure 3-17) is generated the next time the projector is powered ON. The user is prompted to select which
hardware device contains the original serial number and to specify where to restore the settings from if both the
PIB3G and TPC serial numbers do not match.
3-18
Figure 3-17 Hardware Change Window
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
Advertisement
Table of Contents
