Table of Contents
Advertisement
Remote Access Level (RAL)
Set the remote serial protocol access level for a serial communications port.
0 - No Access,
1 - Login Required,
2 - Free Access.
Default value is 1 - Login required.
SUBCODE
DESCRIPTION OF USE
Set the access level on Ethernet all ports.
NONE
Set the access level on RS232 port A.
PRTA
EXAMPLES:
(RAL 0) Disable remote serial protocol access for all Ethernet ports
(RAL?) Get access level for Ethernet ports (RAL!0)
(RAL+PRTA 2) Set remote serial protocol access level on port A to free access
(RAL+PRTA?) Get access level (RAL+PRTA!2)
Reboot TPC (RBT)
Command for rebooting the TPC, requires argument 3.
SUBCODE
DESCRIPTION OF USE
Reboot TPC, use 3 as argument other arguments have no effect.
NONE
Schedule (SCH)
Schedule a power up or a power down at a specific time.
SUBCODE
DESCRIPTION OF USE
Bypass power on scheduling. 1 = enable, 0 = disable
BPON
Bypass power off scheduling. 1 = enable, 0 = disable
BPOF
Set the power on date and time, setting the date/time to empty ("") will turn off power on scheduling until
POND
a new date/time has been set. Format "yyyy-mm-dd hh:mm"
Set the power off date and time, setting the date/time to empty ("") will turn off power off scheduling until
POFD
a new date/time has been set. Format "yyyy-mm-dd hh:mm"
EXAMPLES:
(SC+BPON 1) Disable power on scheduling events, it will still be possible to set the time but no event will occur.
(SC+POFD "2011-07-11 23:00") Schedule a power off event at 11pm on 11 July, 2011
(SC+POND "") Set the power on event to no time - no event will be scheduled, if one was scheduled before it is removed.
(SC+BPOF?) Query the current setting for bypass power off events.
Screen Format (SCF)
elect Screen format file which describes the geometry for the output image.
S
SUBCODE
DESCRIPTION OF USE
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)
Section 7: Serial API
Valid sections are
7-19
Advertisement
Table of Contents
