Removing And Installing Crankshaft Pinion And Rotor Flange - BMW K 1100 LT Repair Manual

Assembling pistons and conrods
L
Note:
[LT] Modified conrod length and pistons from 1993
model year on
Comply with conrod weight tolerances.
•
Weight tolerance .............................................± 4 g
Assemble piston and conrod.
•
L
Note:
The oil bore in the conrod eye is on top in the in-
stalled position. The arrow marking on the piston
crown must point in the forward-travel direction.
Install only pistons of the same make and the
•
same weight category.
e
Caution:
Renew the piston pin circlip each time it is removed.
Removing and installing crankshaft
pinion and rotor flange
X
Tightening torque:
Machine screw ............................................. 50 Nm
11.28
Downloaded from www.Manualslib.com
LT110410
manuals search engine
1
2