Table of Contents
Advertisement
Chapter 35 DHCP
The following table describes the labels in this screen.
Table 145 IP Application > DHCP > DHCP Status
LABEL
Relay Mode
35.3 DHCP Port Tel
Click the Port Tel link in the IP Application > DHCP screen to open the following screen.
Use this screen to configure telephone numbers for each port, if you want to add them into DHCP
option 82 tags. See more information in the IP Application > DHCP > Global (see
on page
313) or IP Application > DHCP > VLAN screen (see
Figure 194 IP Application > DHCP > Port Tel
The following table describes the labels in this screen.
Table 146 IP Application > DHCP > Port Tel
LABEL
Port
Telephone
number
Apply
Cancel
312
DESCRIPTION
This field displays:
•
None: if the Switch is not configured as a DHCP relay agent.
•
Global: if the Switch is configured as a DHCP relay agent only.
•
VLAN: followed by a VLAN ID or multiple VLAN IDs if it is configured as a relay agent for
specific VLAN(s).
DESCRIPTION
This field shows the number of a DSL port. This field also shows the VDSL port bonding group
ID if the port has joined any.
Enter a string or digits to represent the port's telephone number. Spaces are not allowed.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Section 35.4
Section 35.5 on page
318).
VES1724-56 User's Guide
Hide quick links:
Advertisement
Table of Contents
