Cfm Action; Chapter 44 Cfm Action - ZyXEL Communications VES1724-56 User Manual

This chapter explains the CFM (Connectivity Fault Management) Action screen. Refer to
Section 28.1 on page 274

44.1 CFM Action

Click Management and CFM Action in the navigation panel to open this screen. Use this screen to
manage any connectivity faults.
Figure 240 CFM Action
The following table describes the labels in this screen.
Table 177 CFM Action
LABEL
Continuity
Check
Link Trace
Loop Back
Level
VID
MEPID
VES1724-56 User's Guide
to see more information.
DESCRIPTION
Select a level, type a VLAN ID and click Enable or Disable to start or disable
sending the connectivity check packets in this MD (Maintenance Domain).
Select this to trace the nodes on this link.
Select this to perform a loopback test on this link.
Select an MD level (0-7).
Type an MA VLAN ID (0-4096) under the MD level.
Type an MEP ID to specify which MEP port on the device initiates the action.
C
HAPTER
4 4

CFM Action

370