Table of Contents
Advertisement
Chapter 35 DHCP
Table 148 IP Application > DHCP > Global > DHCP Relay
LABEL
Delimiter
Information
Relay Remote
ID
Remote ID
Information
Remote ID
user identifier
Remote ID
Delimiter
Apply
Cancel
316
DESCRIPTION
Select a delimiter to separate the slot ID, port number and/or VLAN ID from each other. You
can use a pound key (#), semi-colon (;), period (.), comma (,), forward slash (/) or space.
Select none to not use any delimiter.
Select the first option and enter a string of up to 32 ASCII or binary characters that the
Switch adds into the client DHCP requests. Spaces are allowed.
Otherwise, select the second option to have the Switch use the system name you configure in
the General Setup screen.
Select the Remote ID check box to have the Switch add information configured in the
Remote ID Information field to client DHCP requests before the Switch relays them to a
DHCP server.
Append Remote ID by user identifier: Select this to have the Switch add the specified
Remote ID user identifier into client DHCP requests received by the Switch. Spaces are
allowed.
Append Remote ID by port name: to have the Switch use the name of the port on which
the client DHCP requests are received and add it to client DHCP requests received by the
Switch.
Append Remote ID by user identifier + port name + port TEL: to have the Switch add
the specified Remote ID user identifier, the port's name, and the port's telephone number into
client DHCP requests received by the Switch.
Enter a string of up to 63 ASCII characters that the Switch adds into client DHCP requests
received on this port. Spaces are allowed.
Select a delimiter to separate the slot ID, port number and/or VLAN ID from each other. You
can use a pound key (#), semi-colon (;), period (.), comma (,), forward slash (/) or space.
Select none to not use any delimiter.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
VES1724-56 User's Guide
Hide quick links:
Advertisement
Table of Contents
