ZyXEL Communications VES1724-56 User Manual page 222

Chapter 24 Multicast
Table 95 Advanced Application > Multicast Status (continued)
LABEL
Dropped By
IGMP Per Port Transmit Counter
This section displays outgoing multicast traffic statistics per port.
Port
Report Out
Query Out
IGMP Per VLAN Receive Counter
This section displays incoming multicast traffic statistics per VLAN network.
VID
Report In
Query In
Dropped By
IGMP Per VLAN Specific Counter
This section displays multicast traffic statistics per VLAN network.
Total GroupNum
222
DESCRIPTION
This column displays the number of multicast queries this port has dropped due to the
following reasons:
MaxGroup: the number of multicast groups the port has joined exceeds the per-port Max
Group Limit configured in the Advanced Application > Multicast > Multicast Setting
screen.
Filter: the port is not allowed to join a multicast group in a multicast join message this
port received. You can configure the filtering list in the Advanced Application >
Multicast > Multicast Setting and Multicast > Multicast Setting > IGMP Filtering
Profile screens.
MVR: this port is not configured as a receiver port in the MVR multicast VLAN. You can
configure the MVR settings in the Advanced Application > Multicast > Multicast
Setting > MVR screen.
Others: reasons other than the ones described above, such as the Switch has insufficient
memory.
This field displays a port number and the port's bonding group ID if it has joined one. A
star (*) displays if the port is the main port in the bonding group.
This column displays how many V1, V2, and V3 multicast join messages and multicast
Leave messages the port has transmitted. V1, V2, and V3 means IGMP versions 1, 2 and
3.
This column displays how many valid V1, V2, and V3 multicast queries the port has
transmitted.
This field displays a multicast VLAN ID.
This column displays how many V1, V2, and V3 multicast join messages and multicast
Leave messages this VLAN network has received. V1, V2, and V3 means IGMP versions
1, 2 and 3.
This column displays how many valid V1, V2, and V3 multicast queries this VLAN network
has received.
This column displays how many multicast queries that have been dropped in this VLAN
due to the following reasons:
Rate: the receiving rate of the ports in this VLAN exceeds the configured rate limits. You
can configure the limit settings in the Basic Setting > Port Setup and Basic Setting >
Rate Limit Profile Setup screens.
Others: reasons other than the previous one.
This field displays the total number of multicast groups this VLAN network has learned
since the last start up or clearing of the IGMP counters.
VES1724-56 User's Guide