Chapter 35 DHCP
35.5 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP clients.
Click IP Application > DHCP in the navigation panel, then click the VLAN link In the DHCP
Status screen that displays.
Note: You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch.
See
Section 8.7 on page 79
Note: This screen is not available if you have enabled DHCP Relay globally in the IP
Application > DHCP > Global > DHCP Relay screen.
You can additionally configure whether to add/replace DHCP relay option 82 tags on a per-port
basis in the Basic Setting > Port Setup screen (see
Figure 201 IP Application > DHCP > VLAN
318
for information on how to set up management IP addresses for VLANs.
Section 8.9 on page
82).
VES1724-56 User's Guide