Link Aggregation Setting - ZyXEL Communications VES1724-56 User Manual

Chapter 17 Link Aggregation

17.4 Link Aggregation Setting

Click Advanced Application > Link Aggregation > Link Aggregation Setting to display the
screen shown next. See
Figure 108 Advanced Application > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 75 Advanced Application > Link Aggregation > Link Aggregation Setting
LABEL
Port Selection
criteria
Group ID
Active
Port
Group
182
Section 17.1 on page 180
DESCRIPTION
Specify the way to choose a port in the trunk group (multiple ports) to transmit/receive
packets for different type of traffic. Select one of the following criteria for the port selection.
Source MAC Address: Uses packets' source MAC address as the criteria.
Destination MAC Address: Uses packets' destination MAC address as the criteria.
Source+Destination MAC Address: Uses packets' both source and destination MAC
address as the criteria.
Source IP Address: Uses packets' source IP address as the criteria. This can be only used
for IPv4 packets.
Destination IP Address: Uses packets' destination IP address as the criteria. This can be
only used for IPv4 packets.
Source+Destination IP Address: Uses packets' both source and destination IP address as
the criteria.
The field identifies the link aggregation group, that is, one logical link containing multiple
ports.
Select this option to activate a trunk group.
This field displays the port number.
Select the trunk group to which a port belongs.
for more information on link aggregation.
VES1724-56 User's Guide