Enabling Vlan Mapping - ZyXEL Communications VES1724-56 User Manual

29.2 Enabling VLAN Mapping

Click Advanced Application and then VLAN Mapping in the navigation panel to display the
screen as shown.
Figure 171 VLAN Mapping
The following table describes the labels in this screen.
Table 125 VLAN Mapping
LABEL
Active
Port
*
Active
Drop Miss
Apply
Cancel
VES1724-56 User's Guide
DESCRIPTION
Select this option to enable VLAN mapping on the Switch.
This field displays the port number.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Select this check box to enable the VLAN mapping feature on this port. Clear this check box to
disable the VLAN mapping feature.
Select this check box to discard the incoming packets that do not match any VLAN mapping rules
on this port. Otherwise, clear the check box to forward the packets without replacing the VLAN
tag.
The Switch forwards any outgoing packets even when they do not match a VLAN mapping rule.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 29 VLAN Mapping
279