Table 177 CFM Action
LABEL
Destination
MAC
Count
TransID
EntryNum
Transmit
Show Result
Examples of connectivity test reports are shown next.
Figure 241 Connectivity Test Report Examples
LoopBack Report
Link Trace Report
Show Detail Report
VES1724-56 User's Guide
DESCRIPTION
Enter the destination port's MAC address which you want to trace the link to.
Note: The destination must be an MEP port.
This is how many times you want to perform for the test.
This is available after you complete a link trace. This is a increasing number to
display how many times the test was done for an MEP port. Enter a TransID and
an EntryNum you get from a test report, and click Show Result to see detailed
information.
This is available after you complete a link trace. This displays how many nodes
traced in a test. Enter a TransID and an EntryNum you get from a test report,
and click Show Result to see detailed information.
Click this to start the connectivity test.
Select a level, type a VID and MEPID and click this to display the result for a test.
Chapter 44 CFM Action
371