Table of Contents
Advertisement
Chapter 9 VDSL Setup
VDSL CPE devices should avoid to transmit data according to your location. See
Frequency Interference)
Figure 59 VDSL RFI Setup
The following table describes the labels in this screen.
Table 38 VDSL RFI Setup
LABEL
Start
Stop
Band
Tone Index
Frequency (kHz)
Modify
Cancel
Clear
114
on
page
101.
DESCRIPTION
Use these columns below this field to specify the starting frequencies for each RFI band.
Use these columns below this field to specify the ending frequencies for each RFI band.
This index number identifies each RFI Band.
A tone is a sub-channel of a VDSL band. DMT divides VDSL bands into many 4.3125 kHz
tones.
Enter an increased number (than previous row) from 0 to 4096.
This read-only field displays a frequency that equals the tone index multiple 4.3125
dBm/Hz. This field automatically calculates after a Tone Index value is entered.
Click this to save the settings to the Switch and return to the previous screen.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
RFI (Radio
VES1724-56 User's Guide
Hide quick links:
Advertisement
Table of Contents
