Use these screens to configure static MAC address forwarding.
11.1 Overview
This chapter discusses how to configure forwarding rules based on MAC addresses of devices on
your network.
11.2 Configuring Static MAC Forwarding
A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static
MAC addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC address
table on a port to access the Switch. See
limit.
Click Advanced Application > Static MAC Forwarding in the navigation panel to display the
configuration screen as shown.
Figure 86 Advanced Application > Static MAC Forwarding
VES1724-56 User's Guide
C
HAPTER
Static MAC Forward Setup
Chapter 19 on page 191
11
for more information about MAC
152