Table of Contents
Advertisement
Click IP Application > DiffServ in the navigation panel to display the screen as shown.
Figure 190 IP Application > DiffServ
The following table describes the labels in this screen.
Table 141 IP Application > DiffServ
LABEL
DESCRIPTION
Active
Select this option to enable DiffServ on the Switch.
Port
This field displays the index number of a port on the Switch.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active
Select Active to enable DiffServ on the port.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
34.3.1 Configuring 2-Rate 3 Color Marker Settings
Use this screen to configure TRTCM settings. Click the 2-rate 3 Color Marker link in the DiffServ
screen to display the screen as shown next.
VES1724-56 User's Guide
Chapter 34 Differentiated Services
307
Hide quick links:
Advertisement
Table of Contents
