Table of Contents
Advertisement
Chapter 23 VLAN Stacking
The following table describes the labels in this screen.
Table 94 VLAN Stacking > Port-based InnerQ
LABEL
DESCRIPTION
Port
The port number identifies the port you are configuring.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Active
Check this box to activate this rule.
CPVID
CPVID is the customer port VLAN ID (the inner VLAN tag). Enter the customer VLAN ID (from 1 to
4094) for frames received on this port. See
information on VLAN ID.
Priority
Select a priority level (from 0 to 7). This is the priority level in the customer VLAN tag that adds to
the frames received on this port.
"0" is the lowest priority level and "7" is the highest.
Remove
Select the check box to remove the customer VLAN tag from outgoing traffic on this port.
InnerQ
This feature is not applicable on a tunnel port.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
216
Chapter 10 on page 129
for more background
VES1724-56 User's Guide
Hide quick links:
Advertisement
Table of Contents
