Table of Contents
Advertisement
Chapter 8 Basic Setting
8.13.1 IPv6 Setup: Configuration
Click the Click Here link in the Configuration field at the bottom of the Basic Setting > IPv6
Setup screen to display the configuration screen. Use this screen to view and configure static IPv6
addresses for the interface.
Figure 47 Basic Setting > IPv6 Setup > Configuration: Click Here
The following table describes the labels in this screen.
Table 22 Basic Setting > IPv6 Setup > Configuration: Click Here
LABEL
Interface
Name
IPv6 Address
IPv6 Prefix
Length
EUI-64 format
Add
Cancel
Index
Delete
Cancel
90
DESCRIPTION
This field displays the name of the IPv6 interface.
Enter an IPv6 address for this interface. An IPv6 interface can have multiple IPv6 addresses.
Enter the IPv6 prefix length (1~128) for this interface. For a link-local IPv6 address, enter 64
here.
If you are configuring an IPv6 global address, select this to use the EUI-64 format to generate
an interface ID from the MAC address of the interface. See
information.
Click Add to save the new settings to the Switch. The setting displays in the summary table at
the bottom of the screen.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry. Click the link to display the settings in the
Static IPv6 Addresses section above so you can view and modify the settings.
Select entries to remove in the Delete column and then click the Delete button to remove
them.
Click Cancel to clear the selected checkboxes in the Delete column.
Section 8.6.8 on page 78
for more
VES1724-56 User's Guide
Hide quick links:
Advertisement
Table of Contents
