Vdsl Template Setup - ZyXEL Communications VES1724-56 User Manual

Chapter 9 VDSL Setup

9.3 VDSL Template Setup

The Switch supports one line profile and one channel profile configured in a VDSL template. Use this
screen to add, modify or delete a VDSL template.
To configure or view VDSL templates, click VDSL Setup > VDSL Profile to display the screen as
shown next.
Note: You can configure up to 60 VDSL templates.
Figure 54 VDSL Template Setup
The following table describes the labels in this screen.
Table 33 VDSL Template Setup
LABEL
Name
Line Profile
Channel Profile
Inm Profile
Rate Adaption Ratio
Channel1
Add
Cancel
Clear
Name
Line Profile
Channel Profile
104
DESCRIPTION
Enter a descriptive name to identify this template.
Select a line profile for this VDSL template. You can configure line profiles by
clicking the LineProfile link in the right-top corner of the screen.
Select a channel profile for this VDSL template. You can configure channel
profiles by clicking the ChanProfile link in the right-top corner of the screen.
Select an INM profile for this VDSL template. You can configure channel profiles
by clicking the InmProfile link in the right-top corner of the screen.
This field displays the transmission rate distribution ratio between upstream
and downstream traffic for channel 1 in this template.
Click Add to save the new VDSL template to the Switch. It then displays in the
summary table at the bottom of the screen.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
This field displays the descriptive name for each configured VDSL template.
This field displays the line profile name configured in each VDSL template.
This field displays the channel profile name configured in each VDSL template.
VES1724-56 User's Guide