Vdsl Channel Alarm Profile Setup - ZyXEL Communications VES1724-56 User Manual

Chapter 9 VDSL Setup
Table 44 VDSL Line Alarm Profile Setup (continued)
LABEL
Add
Cancel
Clear
Name
FECS
ES
SES
LOSS
UAS
Applied Ports
Delete
Cancel

9.4.2 VDSL Channel Alarm Profile Setup

Click the ChanAlarmProfile link at the top-right corner of the VDSL Alarm Template Setup
screen to display the screen as shown. Use this screen to view, add, edit, modify a VDSL channel
alarm profile.
The device sends an alarm trap and generates a syslog entry when the thresholds of the alarm
profile are exceeded.
Figure 67 VDSL Channel Alarm Profile Setup
124
DESCRIPTION
Click Add to save the new rule to the switch. It then displays in the summary table at the
bottom of the screen.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
This field displays the descriptive name for the alarm profile.
This field displays the number of Forward Error Correction Seconds (FECS) that are
permitted to occur within 15 minutes.
This field displays the number of Errored Seconds (ES) that are permitted to occur within
15 minutes.
This field displays the number of Severely Errored Seconds (SES) that are permitted to
occur within 15 minutes.
This field displays the number of Loss Of Signal Seconds (LOSS) that are permitted to
occur within 15 minutes.
This field displays the number of seconds the interface is permitted to be unavailable
within 15 minutes.
This field displays the VDSL port number(s) to which this profile is applied.
Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Click Cancel to clear the selected checkboxes in the Delete column.
VES1724-56 User's Guide