Bonding Group Details - ZyXEL Communications VES1724-56 User Manual

7.2.3 Bonding Group Details

Click a VDSL port's bonding group name in the Group column of the Port Status screen to display
the following screen. Use this screen to check status for an individual VDSL bonding group on the
Switch.
Figure 33 Port Status: Bonding Group Details
The following table describes the labels in this screen.
Table 8 Port Status: Bonding Group Details
LABEL
Group Status
Group Name
Member Port
Active Port
Main Port
Transfer Mode
Bonding Rate US
Bonding Rate DS
Group Counter
Group Name
rxSmallFragments
VES1724-56 User's Guide
DESCRIPTION
This shows the name of the VDSL port bonding group.
This shows the ports in this bonding group.
This shows the port(s) with connections up in this bonding group.
This field displays the lower-numbered port in the VDSL port bonding group. This is the
main port. The Switch records data sent and received counters based on this port.
This field displays the traffic type (PTM or ATM) of this bonding group.
Packet Transfer Mode (PTM) is packet-oriented and supported by the VDSL2 standard.
Asynchronous Transfer Mode (ATM) is a connection-oriented and cell-switching
technology. It is supported by the ADSL/ADSL2/ADSL2+ standards.
This field displays the current upstream rate for this bonding group.
This field displays the current downstream rate for this bonding group.
This shows the name of the VDSL port bonding group.
The size of all data fragments should be the same and it is negotiated by the Switch and
individual VDSL CPEs.
This shows the number of data fragments this group dropped due to being smaller than
the negotiated size..
Chapter 7 System Status and Port Statistics
65