Multiple Rstp; Multiple Stp - ZyXEL Communications VES1724-56 User Manual

Chapter 14 Spanning Tree Protocol

14.1.4 Multiple RSTP

MRSTP (Multiple RSTP) is ZyXEL's proprietary feature that is compatible with RSTP and STP. With
MRSTP, you can have more than one spanning tree on your Switch and assign port(s) to each tree.
Each spanning tree operates independently with its own bridge information.
In the following example, there are two RSTP instances (MRSTP 1 and MRSTP2) on switch A.
To set up MRSTP, activate MRSTP on the Switch and specify which port(s) belong to which spanning
tree.
Note: Each port can belong to one STP tree only.
Figure 92 MRSTP Network Example

14.1.5 Multiple STP

Multiple Spanning Tree Protocol (IEEE 802.1s) is backward compatible with STP/RSTP and
addresses the limitations of existing spanning tree protocols (STP and RSTP) in networks to include
the following features:
• One Common and Internal Spanning Tree (CIST) that represents the entire network's
connectivity.
• Grouping of multiple bridges (or switching devices) into regions that appear as one single bridge
on the network.
• A VLAN can be mapped to a specific Multiple Spanning Tree Instance (MSTI). MSTI allows
multiple VLANs to use the same spanning tree.
• Load-balancing is possible as traffic from different VLANs can use distinct paths in a region.
162
VES1724-56 User's Guide