Table of Contents
Advertisement
2.3.3 Mounting the Switch on a Rack
Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
1
up the two screw holes on the bracket with the screw holes on the side of the rack.
Figure 5 Mounting the Switch on a Rack
Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes
2
into the rack.
Repeat steps
3
2.4 Connecting the Frame Ground
Connect the frame ground on the front panel using an M4 x 6mm machine screw with 2 suitable
lock washers to a building's protective earthing terminals.
Use a 18 AWG or larger green-and-yellow frame ground wire.
Connect the frame ground before you connect any other cables or
wiring.
Figure 6 Frame Ground
VES1724-56 User's Guide
1
and
2
to attach the second mounting bracket on the other side of the rack.
Frame Ground
Chapter 2 Hardware Installation and Connection
25
Hide quick links:
Advertisement
Table of Contents
