ZyXEL Communications VES1724-56 User Manual page 71

Figure 36 Basic Setting > System Info
The following table describes the labels in this screen.
Table 10 Basic Setting > System Info
LABEL
System Name
ZyNOS F/W
Version
Modem Code F/
W Version
Ethernet
Address
Power Module
1st F/W
Version
2nd F/W
Version
Hardware Monitor
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
VES1724-56 User's Guide
DESCRIPTION
This field displays the descriptive name of the Switch for identification purposes.
This field displays the version number of the Switch 's current firmware including the date
created.
This field displays the version number of the VDSL chip firmware used in the Switch.
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
This field displays Dual when the Switch supports both AC and DC power input. Otherwise, it
displays AC or DC when the corresponding power module is connected and detected.
This field displays the version number of the currently installed firmware on the first flash
memory.
This field displays the version number of the currently installed firmware on the second flash
memory.
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
printed circuit board.
This shows the current temperature at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error for those above.
Chapter 8 Basic Setting
71