Cfm Md - ZyXEL Communications VES1724-56 User Manual

Table 123 CFM MA
LABEL
MA Name
MA VID
MEP Port
MIP Port
Delete
Cancel

28.3 CFM MD

Click the link CFM MD on the CFM MA screen to open this screen. Use this screen to create an MD
and specify an MD level. Refer to
Figure 169 CFM MD
The following table describes the labels in this screen.
Table 124 CFM MD
LABEL
MD Name
MD Level
Add
Cancel
Clear
Index
MD Name
MD Level
Delete
Cancel
VES1724-56 User's Guide
DESCRIPTION
This field displays the descriptive name of the MA.
This field displays the ID number of the MA VLAN group.
This field lists individual MEP ports in this MA VLAN group.
This field lists individual MIP ports in this MA VLAN group.
Select rules to remove in the Delete column and then click the Delete button to remove them.
Click Cancel to clear the Delete check boxes.
Section 28.1 on page 274
DESCRIPTION
Type a name (up to 40 printable ASCII characters) for this MD. This is for identification
purposes.
Type a level number (0-7) for this MD.
Click Add to add the settings as a new entry in the summary table below.
Click Cancel to reset the fields.
Click Clear to start configuring the screen again.
This field displays the index number for the record in this summary table.
This field displays the descriptive name of the MD.
This field displays the level number of the MD.
Check the rule(s) that you want to remove in the Delete column and then click the Delete
button.
Click Cancel to clear the Delete check boxes.
for more information about CFM.
Chapter 28 CFM
277