Link Aggregation Id; Link Aggregation Status - ZyXEL Communications VES1724-56 User Manual

Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing network
topology loops.

17.2.1 Link Aggregation ID

LACP aggregation ID consists of the following information
Table 72 Link Aggregation ID: Local Switch
SYSTEM PRIORITY MAC ADDRESS
0000
Table 73 Link Aggregation ID: Peer Switch
SYSTEM PRIORITY MAC ADDRESS
0000

17.3 Link Aggregation Status

Click Advanced Application > Link Aggregation in the navigation panel. The Link Aggregation
Status screen displays by default. See
Figure 107 Advanced Application > Link Aggregation Status
The following table describes the labels in this screen.
Table 74 Advanced Application > Link Aggregation Status
LABEL
Index
Enabled Port
Synchronized
Ports
Aggregator ID
Status
2. Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
VES1724-56 User's Guide
00-00-00-00-00-00
00-00-00-00-00-00
Section 17.1 on page 180
DESCRIPTION
This field displays the trunk ID to identify a trunk group, that is, one logical link containing
multiple ports.
These are the ports you have configured in the Link Aggregation screen to be in the trunk
group.
These are the ports that are currently transmitting data as one logical link in this trunk
group.
Link Aggregator ID consists of the following: system priority, MAC address, key, port priority
and port number. Refer to Section 17.2.1 on page 181
This field displays how these ports were added to the trunk group. It displays:
• Static - if the ports are configured as static members of a trunk group.
• LACP - if the ports are configured to join a trunk group via LACP.
2
:
KEY PORT PRIORITY
0000 00
KEY PORT PRIORITY
0000 00
for more information.
for more information on this field.
Chapter 17 Link Aggregation
PORT NUMBER
0000
PORT NUMBER
0000
181