Table of Contents
Advertisement
Chapter 26 IP Source Guard
and source VLAN ID of the unauthorized ARP packet. To open this screen, click Advanced
Application > IP Source Guard > ARP Inspection.
Figure 155 ARP Inspection Status
The following table describes the labels in this screen.
Table 116 ARP Inspection Status
LABEL
Total number of
filters
Index
MAC Address
VID
Port
Expiry (sec)
Reason
Delete
Cancel
Change Pages
262
DESCRIPTION
This field displays the current number of MAC address filters that were created because the
Switch identified unauthorized ARP packets.
This field displays a sequential number for each MAC address filter.
This field displays the source MAC address in the MAC address filter.
This field displays the source VLAN ID in the MAC address filter.
This field displays the source port of the discarded ARP packet.
This field displays how long (in seconds) the MAC address filter remains in the Switch. You
can also delete the record manually (Delete).
This field displays the reason the ARP packet was discarded.
MAC+VLAN: The MAC address and VLAN ID were not in the binding table.
IP: The MAC address and VLAN ID were in the binding table, but the IP address was not
valid.
Port: The MAC address, VLAN ID, and IP address were in the binding table, but the port
number was not valid.
Select this, and click Delete to remove the specified entry.
Click this to clear the Delete check boxes above.
Click Previous Page or Next Page to show the previous/next screen if all status
information cannot be seen in one screen.
VES1724-56 User's Guide
Hide quick links:
Advertisement
Table of Contents
