Front Wheel - MOTO GUZZI V1000 G5 Workshop Manual

156 L.. _ _
F
I
iii
Tighten the brake disc nuts to hub with a torque
wrench set to 2.2-2.4 kgm (16-18 It. Ibs). Ensure
all spokes are proper ly tensioned and the wheel is
well balanced.
Assembling the front wheelan the front fork legs
Reverse the removal sequence.
The spindle nut has to be tightened to a torque loa-
ding of 14-15 kg (1OG-108 fl f lbs).
Spacer
~ E
.. has to be fitted on the R/ H side (fig. 154),
23.2 FRONT WHEEL - 1000 SP
Removal from front fork legs (fig. 156)
• Fit stand N. 18 912450 (1
in
fig. 35) under the
engine.
• Loosen screws "A .. securing the hyd raulic cali-
per .. B» to the fork leg, raise the caliper with piping
and pu ll it out from the disc.
• Undo nut and washer .. C .. on the wheel spindle
and remove spacer ,,0» .
• Loosen screws " E .. secur ing the spind le to fork
rods ..
E» .
• Slide oul spindle ..
F" with
spacer
"G" (from the
L/ H
side).
• Remove brake disc from the caliper on the bot-
tom R/ H fork sleeve.
Removing the front wheel hub (fig. 157)
• Undo six self-locking nuts ,,1 .. and remove six
screws «2». Remove both brake discs ,,3».
• Using a suitable punch remove both bearings
" 4,, wilh spacer ,,5» .
157 L-________ ~2 __ ~ __ ~ ____ ~~ ____________ ~ __________ ~ ____ ~ ______ ~
106