MOTO GUZZI V1000 G5 Workshop Manual page 92

127
128
3 Oil seeping through the box and the bottom
suspension securing spindle
If this spi ndle shows up oily. put some TELFLON
00 01 00 00 tape on the threaded portion (57 fig . 35).
18.3 RE·ASSEMBLY
Taper bearing Quter races In the housing
These are fitted using special punch part N. 179451 60
(53 in fig. 128).
I
90
129
Housing and Its components
Assemble these reversing the dismantling sequence
ensuring that
jf
no parts have been changed, the
number of shims between spacer and bear ing, also
between bearing and bevel gear is the same.
If any part has been replaced, a new shimming will
be required.
The nut is tightened using holding tool 1290 71 00
(34 in fig. 124) and a wrench. If properly shimmed up.
the pinion should turn freely but without any play