MOTO GUZZI V1000 G5 Workshop Manual page 73

the gear complete with roller cage, taking care not
to mislay the small spring and the stop dowel.
Selector dru m
Undo the oil breather nut from the box and remove :
• Spring (the oil breather nut has also the function
of retaining the pawl which acts as a stop on the
selector drum). The pawl will remain in its housing
in the gearbox and can be removed only after the
complete gearbox has been stripped ).
• Undo the securing screws and take out Ihe neu-
Iral indicator solenoid from its housing in
the
gear-
box.
• Slip off the gear selector drum complete with
rod , paying particular attention 10 the position of the
shims.
• lift out the rod from the drum.
Shafls complete with gears and sliding muff forks of
layahaft
From the gearbox take out the complete layshafl
(" , .. fig. 92) and from Ihis remove :
•
•
•
•
•
•
seal ring at the gearbox cover end ;
low speed gear. roller cage, and bushing:
slidi ng sleeve for first and 2nd speed:
nut at the 41h speed gear side ;
roller bearing ;
shims :
*
mm
Shi m up to obta in the Indicated sizes.
,. FITTED WITH ~ lOCTITE.
•
L -____________________________________________________________
~ 9 2
71