MOTO GUZZI V1000 G5 Workshop Manual page 68

2'-~
31-..,
___ '8
86L-____________________________ --"
66
15.5 CARBURETTOR COMPONENTS (fig. 86)
1 Rubber caps, cable adjusters.
2 Throttle control and starter cable adjusters.
3 Throttle and starter cable nuts.
4 Starter cover securing screw.
S Starter cover.
6 Gasket, starler cover.
7 Starter valve spring ,
S Starter valve.
9 Idling screw.
10 Idling screw spring.
11 Throttle valve adjusting screw.
12 Throttle valve adjusti ng screw spring.
13 Th rottle valve cover screw.
14 Throttle valve cover screw washers.
15 Throtlle valve cover.
16 Throttle valve cover gasket.
17 Throttle valve spring.
18 Taper needle clip.
19 Throttle valve.
20 Taper needle, .. V-. type.
21 Lockring clip.
22 Clip,
23 Insulating rubber.
24 Clip locking screw.
25 Pump body.
26 Pump plunger.
27 Ball valve.
28 Valve seat.
29 Valve spring.
30
Main jet holder.
31 Main jet.
32 Float chamber plug gasket.
33 Float chamber plug .
34 Starter jet.
35 Starter jet washer.
36 Atomizer.
37 Slow running jet.
38 Fuel cutout needle.
39 Banjo union.
40 Fuel filter.
41 Banjo union securing bolt.
42 Banjo union securing bolt washer.
43 Float.
44 Float pin.
45 Float chamber gasket.
46 Float chamber.
47 Fuel pump.
48 Carburettor body.