MOTO GUZZI V1000 G5 Workshop Manual page 101

7 Fork sleeve.
8 Screw, spindle securing.
•
Nul, spindle screw .
,.
Oil drain screw from fork legs.
11 Washer, oil drain screw.
12 Studs, fender securing.
13
Dust caps.
14
Seal rings.
15
Bottom caps.
,.
Circlips.
17
Rod ends.
18 Tubes.
,.
Damper nuls.
2. Nylon caps, spring return.
21
Dampers.
22 Upper fo rk caps.
23 Gaskets. upper caps.
24
Bearings. cover retaining.
25
Stay lubes.
2. Springs, lower.
27
Spacers.
28 Top springs.
2.
Fork sleeves.
3.
Bottom yoke.
Inspections
Ensure that the chromed section of the fork rod
which slides in the bottom cover is in good condi·
tion and free from sea rings. Ensure also the rod
is perfeclly straight and the threaded section unda-
maged.
Rod diameter (chromed portion): 34.715-34.690 mm
(1.3662-1.365"). The bottom fork cover is in light
alloy. Ensure its inner part is not scored or exces-
sively worn.
I/O of cover is 34.750-34.790 mm {1.367-1 .369"}.
M''.''''iI'''~
141
21 24
"-___________________________________________________________________ 142
99