Mix-Point Examples - Extron electronics DMP 64 User Manual

Mix-point Examples

In order to better understand how mix-points work, the following diagrams provide
examples of different mix setups.
Inputs
1 Mic/Line Input 1
GAIN GAIN
FILT FILT
2 Mic/Line Input 2
GAIN FILT
3 Mic/Line Input 3
GAIN
FILT
4 Mic/Line Input 4
GAIN FILT
5 Mic/Line Input 5
GAIN
FILT
6 Mic/Line Input 6
GAIN
FILT
Virtual Bus Return
A
FILT
B
FILT
C
FILT
D
FILT
Figure 41.
In the first example (see figure 41), input audio from Mic/Line Input 1 is processed and
arrives at the output mix-point. Double-click on the mix-point to open the dialog box. The
mix-point opens muted (mute box is red). When the mute button is released, the mix-point
turns teal with a light green circle to indicate the open mix-point dialog box is the focus,
and the signal is routed to output 1.
The mix level can be adjusted using the slider or by direct input of a value between
-35 and 25.0 dB into the dialog box below the slider.
GAIN GAIN
FBS FBS DYN DYN DYN DYN DLY DLY DUCK DUCK
FBS DYN DYN DLY GAIN
DUCK
GAIN
FBS DYN DYN DLY DUCK
FBS DYN DYN DLY GAIN
DUCK
GAIN
FBS DYN DYN DLY DUCK
GAIN
FBS DYN DYN DLY DUCK
DYN LOUD GAIN
DYN LOUD GAIN
DYN LOUD GAIN
DYN LOUD GAIN
Input 1 to Output 1
TRIM TRIM DLY DLY FILT FILT DYN DYN VOL VOL
LOUD LOUD
TRIM LOUD DLY FILT DYN VOL
TRIM DLY FILT DYN VOL
LOUD
TRIM DLY FILT DYN VOL
LOUD
A B C D
Virtual Bus Send
DMP 64 • Software Control
1
2
3
4
Outputs
64