Presets Drop-Down; Mode Buttons - Extron electronics DMP 64 User Manual

Presets Drop-down

Displays a list of up to 32 presets. Select a preset from the list to
display it in the window and either activate it (Recall), abort the
selection without either recalling or deleting it (Cancel), or delete it
(Delete).
NOTE: An asterisk in the drop-down list indicates a partial preset exists only in
the DMP 64 and has not been uploaded to the DSP Configurator.

Mode Buttons

Provides selection between Live mode and Emulate mode. See
Emulate Mode and Live Mode
Backup
When in Live mode (connected to a DMP 64), if presets exist in the DMP 64 that are not
present in the DSP Configurator program (indicated by an asterisk next to the preset
name), the function halts and prompts the user to run a backup.
Backup (
File>Backup
the DMP 64 to a DSP configuration (.edc) file within the DSP Configurator program and
then displays a prompt to save the file to the hard drive. Backup is unavailable when the
DSP Configurator program is in Emulate mode.
on page 76 for more information.
) transfers all partial presets plus the current configuration from
DMP 64 • Software Control 26