Interval Speed Increase Control - Canon imageRUNNERC1022 Service Manual

Chapter 9

9.1.3 Interval Speed Increase Control

Color imageRUNNER C1030 / Color imageRUNNER C1030iF
When paper is fed to the Reverse Assembly, DC Controller accelerates process speed approx. 4 times faster for color and 3 times faster for B&W.In addition, process
speed is accelerated approx. 4 times faster for both color and B&W at Delivery Assembly. In the case of 2-sided print, process speed is accelerated approx. 4 times
faster for color and 5 times faster for B&W at Duplex Feed Assembly.
Timing
Timing of increasing the speed
Timing of decreasing the speed
Reverse assembly
SR708: pre-registration sensor
9-4
T-9-2
Single-sided printing
After the trailing edge of the paper passes through the
fixing delivery roller
After the trailing edge of the paper passes through the
holding roller 2
Holding roller 2
Increasing the speed
Fixing delivery roller
F-9-4
Duplex printing
After the trailing edge of the paper passes through the
fixing delivery roller
When the leading edge of the paper reaches the pre-
registration sensor
Duplexing feed assembly
Increasing
the speed
SR708
Decreasing
the speed
0025-8950