Canon imageRUNNERC1022 Service Manual page 62

Chapter 1
Item
E-mail/I-Fax *4
SMTP Receive
POP
SMTP Sever
E-mail Address
POP Server
POP Address
POP Password
POP Interval
Authentication / Encryption
POP Auth. Before Send
SMTP Authentication
User Name
Password
Communication Settings *4
Item
E-mail/I-Fax Settings
Send Data Size Limit
Divide TX Data Oversize.
Default Subject
Fax Settings
Send Start Speed
Receive Start Speed
R-key Setting
Memory Lock Settings
Use Memory Lock
Memory Lock Password
Report Print
Memory Lock Time Settings
Memory Lock Start Settings
Memory Lock End Settings
1-40
T-1-37
System Management Set. > Network Settings
OFF */ON
OFF */ON
Name of superior server of E mail, I-Fax
Max 48 characters
Enter IP address in the case that a DNS server is not provided. In the case that an IP address for the DNS server
is registered, enter a name that the DNS server can understand.
Ex.: mail_server.ccm.canon.co.jp
Account for sending E mail, I-Fax
Max 64 characters
Ex.: account@a01.ccm.canon.co.jp
POP server name for receiving I-Fax using POP
Max 48 characters
Enter IP address in the case that a DNS server is not provided. In the case that an IP address for the DNS server
is registered, enter a name that the DNS server can understand.
Account for receiving I-Fax using POP
Max 32 characters
Password for receiving I-Fax using POP
Max 32 characters
0 to 99 Minutes (Transmission with POP is not implemented when 0 is set.) *0
OFF*/ON
OFF*/ON
Max 64 characters (Can be set when SMTP authentication is ON)
Max 32 characters (Can be set when SMTP authentication is ON)
T-1-38
System Management Set. > Communication Settings *4
0 to 99MB, in 1MB unit (3MB*)
OFF*/ON
Max 40 characters (Attached Image*)
33600*/14400/9600/7200/4800/2400 bps
33600*/14400/9600/7200/4800/2400 bps
PSTN */ PBX Switch method: PREFIX(prefix code), HOOKING
OFF*/ON
Max. 7 digits
OFF*/ON
Do not Specify *, Specify
Time setting
Time setting
Settings
Settings