Canon imageRUNNERC1022 Service Manual page 39

Fax Settings
*: default settings
*3: Only when the Super G3 FAX Board is attached.
*4: only for Japan, China, KR
*5: except AUS
*6: except Singapore
*7: only U.S.A.
*8: only for AUS
*9: The maximum differs depending on the destination.
Item
User Settings
Register Unit Telephone #
Tel. Line Type Selection *5
-
Manual
Offhook Alarm *2
TX Settings
ECM TX
Set Pause Time
Auto-redial
Redial Times
Redial Time (min.)
TX Error Redial
Check Tone Before Sending*6
RX Settings
ECM RX
Reception mode Selection
Auto RX *
Fax/Tel Auto Switch
Ring Start Time
Fax / Tel Ring Time
Voice Response
After Ring Action
Manual RX
Answer Mode
DRPD:SELECT FAX *7
NET SWITCH *8
Incoming Ring
Ring Times *9
Remote RX
Remote RX ID
Manual/Auto Switch
Fax / Tel Ring Time
RX Restriction
T-1-10
Communications Settings *3 > Fax Settings
Max. 20 characters
-
-
120V, 230V: Push (Tone) * / dial (Pulse) 10 PPS / dial (Pulse) 20 PPS *4
100V: dial 20 PPS*4 * / dial 10 PPS / Push
OFF*/ON (This function is not available for the external telephone.)
OFF/ON*
1 to 15 seconds (2*)
OFF/ON*
100V: 1 to 15 (2*)
120V, 230V: 1 to 10 (2*)
2 to 99 minutes (*: 5(China), 4(TW), 2(Others))
OFF/ON*
OFF/ON (*: Depending on the destination)
OFF/ON*
4-30 seconds (*: 6(Japan, U.S.A., Canada), 8(Others))
15-300 seconds (*: 15(Japan, U.S.A., Canada), 17(Others))
OFF*/ON
Done / Receive *
DOUBLE RING*./SHORT-SHORT-LONG/SHORT-LONG-SHORT/OTHER RING TYPE/NORMAL RING
OFF*/ON
1 to 99 times (*: 1(China), 2(Others))
OFF*/ON
00 to 99 25*
OFF*/ON
1 to 99 seconds (15*)
OFF*/ON
Settings
Chapter 1
1-17